Re: Endpin Help

[ Follow Ups ] [ Post Followup ] [ WWWBoard ] [ FAQ ]

Posted by Reed on March 31, 2001 at 14:03:17:

In Reply to: Re: Endpin Help posted by Reed on March 31, 2001 at 13:32:10:


: : thanks but how do i ream it?

: Okay, if you have to ask, then you don't have the tools, you need a reamer in the diameter of the hole you are making. They come in many different sizes you can get them at most any wood shop or hardware store or from stew-mac ( It looks like a cone with teeth on in. You drill a pilot hole where you want the endpin plug to go, and then make the hole bigger with the reamer, then smooth it out by sanding it down, then just stick the plug in, which should fit snugly in the hole. If you've never done this before, this may be too big a project for you, and you may want to take it to a repair shop.
P.S. Oh, one other suggestion, which is just a thought, I take no responsibility if you decide to do it, but if you have a steady hand, you can attach a router bit in the diameter you need to a drill, and accomplish it that way.

Follow Ups:

Post a Followup




Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ WWWBoard ] [ FAQ ]