Bass Lessons .com - the bass resource.
Posted by Blisshead on July 25, 2001 at 09:29:04:
In Reply to: Re: to drill? posted by Dave Rawlings on July 25, 2001 at 08:21:43:
: I have a Peavey TNT150. It's got a single 15 and is not all that heavy. But lugging even that little weight around can screw up your back, so I put casters on the day after I got it. Didn't change the sound a bit. I'd suggest the following; you might as well make it worth while. Bolt the casters on instead of just screwing them on. For me this involved taking the speaker out (to get access to the inside-your cabinet may be different), drilling holes for the bolts and using washers and nylon lock nuts on the inside of the cabinet. After awhile, screws can work themselves loose from the cabinet but with four bolts on each caster, the cabinet will fail before the casters fall off! Good luck.
I agree with Dave, bolt them on or they may damage the wood when they start falling off. You can usually buy casters that have a metal pin that pops into a metal plate that bolts on to the cab; then you can take the casters off and on at will and be able to put the cab on things without fear of it vibrating itself off anything. Good luck. -B
Post a Followup