Bass Lessons .com - the bass resource.
Posted by rumblethump on April 09, 2001 at 09:40:52:
In Reply to: Re: Gallien-Kruger posted by onebassboy on April 07, 2001 at 14:25:26:
One, If you run both the 4ohm and 8 ohm cab it will result in the amp seeing a 2.67 amp load. I would be hesitant to do that without checking with GK to see
if it will handle it. A GK rep told me DO NOT run a 4 ohm cab on the 8 ohm circuit of the 700 and 800 it will cause magic smoke to appear. TIC
: : : : :
: : What was GK thinking when they designed the 700 and 800 biamp heads. The
: : Woofer amp is 4 ohms. The mid highs is 8 ohms. Most low end cabs are 8 ohms
: : so you can only get half the amp power available to them. Most, not all, 2-10 cabs,
: : are 4 ohm. They can't be run on the 8 ohm circuit which is why I never looked any further at them! Screwy design.
: yah i've heard that ... so if i get a 2x10 cab, would that work with my 400rb fine?? or would i start to loose power to the 15"???
Post a Followup