Bass Lessons .com - the bass resource.
Posted by rumblethump on April 26, 2001 at 12:38:13:
In Reply to: Re: Connecting your bass - one of the nice things posted by Glen on April 26, 2001 at 08:18:32:
What rigs are you going to be running? You can alway take a signal from
your effects out to another amp (padded/active input works better). My vintage sunn, I can run a plug from another
input, over to another amp. Daisy chain. You could get a splitter box and split the signal from your bass and send it to 2 amps. Morley makes one that a/b or a&b, that would work for you.
: about electric current is that it can be split easily, and without much penalty. A simple Y-adapter will do the job, unless you want to add a preamp along the way.
: And yes, you could use the y-adapter on the send/return if you don't want to mess w/ the original input. In either case make sure both amps are on the same electrical circuit, and polarized properly.
: : Sometimes at gigs I have the possibility of having two different amp/cab combinations at hand. So I was wondering what is the best way to connect these two amps? Should I use a box that divides one signal into two, or is there such? Or should I use the send/return plug-ins? Or am I completely lost hear?
: : Dave Wood
Post a Followup