Bass Lessons .com - the bass resource.
Posted by Rudy Zulkarnaen on April 14, 2001 at 17:29:23:
In Reply to: Re: cutting the top of the bridge?? posted by Reed on April 13, 2001 at 13:34:02:
: How much lower? Keep in mind that a few MM will make a huge difference, and you can't put back what you take off.It is much easier to shave the top than the feet,and I suppose you don't want to get bridge adjusters since you didn't mention them, so here is what I suggest. Cut the string slots in the bridge to the level that you want them to be, and then sand the top down to meet it.
: Be careful, and Good Luck!
hi... thanks for the advice...
Post a Followup